DVD beschreiben mit Plextor 716A+Nero nicht möglich

666 · 16. Januar 2006

Hallo,

ich habe mir den DVD-RW Plextor 716A zugelegt. Mit Nero vers. 6.6 und 7.x kommt es beim Brennversuch einer DVD zu einem Fehler.

Vorweg noch ein anderes Problem: der Brenner und die benutzten CD-Rohlinge der Marke Phillips unterstützen beim beschreiben einer CD max.48x
Jedoch kann ich eine CD nur mit 16x bis 24x beschreiben da ich sonst einen Buffer-Underrun bekommen, mit der Fehlermeldung, dass die Daten nicht schnell genug angeliefert werden konnten.
Sehr seltsam finde ich, dass es zum Buffer-Unerrun kommt, da der Brenner Burn-Proof unterstützt und diese Funktion beim Brenner und in Nero aktiviert ist.
-> Weiss jemand hierzu schon einen Rat?

Kommen wir aber zu meinem eigentlichen Problem: das beschreiben einer DVD sollte laut Brenner mit 16x funktionieren und auch die getesteten DVD-Rohlinge der Marke Phillips und Verbatim unterstützen diese Schreibgeschwindigkeit.
Nun habe ich mir eine Daten-DVD im ISO-Modus (UDF ebenfalls getestet) zusammengestellt und versuche diese zu brennen (alle Brenngeschwindigkeiten wurden schonm ausprobiert) und jedesmal erhalte ich folgende error-Log bzw. der Brennvorgang war nicht erfolgreich.

Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:             <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
Adapter driver:      <IDE>                     HA 1
Drive buffer  :      8192kB
Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <Generic  DVD-ROM         >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD800JB-00CRA1      17.0     ultra Port 0 ID 0  DMA: Off
DiskPeripheral       : SAMSUNG SP2014N         VC10     ultra Port 0 ID 2  DMA: Off
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral      : TOSHIBA DVD-ROM SD-M15021012    viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral      : PLEXTOR DVDR   PX-716A  1.09    viadsk Port 2 ID 1  DMA: Off
DiskPeripheral       : IBM-DTTA-351010         T56O    viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM            D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A     I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1535MB (1572316kB)
Free physical memory: 1095MB (1121560kB)
Memory in use       : 28 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.1.2006
ISO Zusammenstellung
20:44:09    #1 Text 0 File Isodoc.cpp, Line 6411
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : FALSE
    Simulate                : FALSE
    Write                   : TRUE
    Finalize CD             : TRUE
    Multisession            : FALSE
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 2 (Max. of 31 chars)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660;1 file extensions        : TRUE
   
20:44:09    #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 81920KB of Memory
   
20:44:09    #3 Text 0 File Reader.cpp, Line 124
    Reader running
   
20:44:09    #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)
   
20:44:09    #5 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media
   
20:44:09    #6 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2261471 (502:32.71, 4416MB)
   
20:44:09    #7 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)
   
20:44:09    #8 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
     Disc Manufacturer: MCC 03 - RG20 
     Disc Application Code: 64, Disc Physical Code: 193
   
20:44:09    #9 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
   
20:44:09    #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2261472 (2261472) = #2261472/502:32.72
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2261472 blocks [I: PLEXTOR DVDR   PX-716A]
    --------------------------------------------------------------
   
20:44:09    #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4631494656, ISRC ""
    DAO layout:
    ===========
     __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
           0 |  lead-in |   0 |    0x41 | 0x00
           0 |        1 |   0 |    0x41 | 0x00
           0 |        1 |   1 |    0x41 | 0x00
     2261472 | lead-out |   1 |    0x41 | 0x00
   
20:44:09    #12 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
20:44:09    #13 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started
   
20:44:09    #14 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.
   
20:44:09    #15 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed
   
20:44:09    #16 Phase 36 File dlgbrnst.cpp, Line 1725
    Burn process started at 4x (5.540 KB/s)
   
20:44:22    #17 Phase 38 File dlgbrnst.cpp, Line 1725
    Burn process failed at 4x (5.540 KB/s)
   

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

wenn ich zuvor die optin "maximale schreibgeschw. ermitteln" und "Simulation" anklickeerhalte ich folgende error-Log:

Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0001), size=45056 bytes, created 06.05.2002 11:01:14
ahead WinASPI: File 'F:\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02.11.2004 12:54:32

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:             <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
Adapter driver:      <IDE>                     HA 1
Drive buffer  :      8192kB
Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <Generic  DVD-ROM         >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD800JB-00CRA1      17.0     ultra Port 0 ID 0  DMA: Off
DiskPeripheral       : SAMSUNG SP2014N         VC10     ultra Port 0 ID 2  DMA: Off
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral      : TOSHIBA DVD-ROM SD-M15021012    viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral      : PLEXTOR DVDR   PX-716A  1.09    viadsk Port 2 ID 1  DMA: Off
DiskPeripheral       : IBM-DTTA-351010         T56O    viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM            D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A     I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE           : 0
Physical memory     : 1535MB (1572316kB)
Free physical memory: 834MB (854520kB)
Memory in use       : 45 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.1.2006
ISO Zusammenstellung
20:47:36    #1 Text 0 File Isodoc.cpp, Line 6411
    Iso document burn settings
    ------------------------------------------
    Determine maximum speed : TRUE
    Simulate                : TRUE
    Write                   : TRUE
    Finalize CD             : TRUE
    Multisession            : FALSE
    Burning mode            : DAO
    Mode                    : 1
    ISO Level               : 2 (Max. of 31 chars)
    Character set           : ISO 9660
    Joliet                  : TRUE
    Allow pathdepth more than 8 directories : TRUE
    Allow more than 255 characters in path  : TRUE
    Write ISO9660;1 file extensions        : TRUE
   
20:47:36    #2 Text 0 File ThreadedTransfer.cpp, Line 525
    ReadBuffer-Pipe got 262144KB of Memory
   
20:47:36    #3 Text 0 File Reader.cpp, Line 124
    Reader running
   
20:47:36    #4 Text 0 File Writer.cpp, Line 113
    Writer I: PLEXTOR DVDR   PX-716A running
   
20:47:36    #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
    First writeable address = 0 (0x00000000)
   
20:47:36    #6 Text 0 File Burncd.cpp, Line 3342
    Turn on Disc-At-Once, using DVD media
   
20:47:36    #7 Text 0 File DlgWaitCD.cpp, Line 279
    Last possible write address on media:  2298495 (510:46.45, 4489MB)
    Last address to be written:            2190815 (486:50.65, 4278MB)
   
20:47:36    #8 Text 0 File DlgWaitCD.cpp, Line 291
    Write in overburning mode: NO (enabled: CD)
   
20:47:36    #9 Text 0 File DlgWaitCD.cpp, Line 2578
    Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
     Disc Manufacturer: MCC 03 - RG20 
     Disc Application Code: 64, Disc Physical Code: 193
   
20:47:36    #10 Text 0 File DlgWaitCD.cpp, Line 458
    >>> Protocol of DlgWaitCD activities: <<<
    =========================================
   
20:47:36    #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
    Setup items (after recorder preparation)
     0: TRM_DATA_MODE1 ()
        2 indices, index0 (150) not provided
        original disc pos #0 + 2190816 (2190816) = #2190816/486:50.66
        relocatable, disc pos for caching/writing not required/ required, no patch infos
        -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2190816 blocks [I: PLEXTOR DVDR   PX-716A]
    --------------------------------------------------------------
   
20:47:36    #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
    Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
    DAO infos:
    ==========
     MCN: ""
     TOCType: 0x00; Session Closed, disc fixated
     Tracks 1 to 1:
       1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4486791168, ISRC ""
    DAO layout:
    ===========
     __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep_______
___
           0 |  lead-in |   0 |    0x41 | 0x00
           0 |        1 |   0 |    0x41 | 0x00
           0 |        1 |   1 |    0x41 | 0x00
     2190816 | lead-out |   1 |    0x41 | 0x00
   
20:47:36    #13 Text 0 File SCSIPassThrough.cpp, Line 36
    SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
   
20:47:36    #14 Phase 24 File dlgbrnst.cpp, Line 1725
    Caching of files started
   
20:47:36    #15 Text 0 File Burncd.cpp, Line 4176
    Cache writing successful.
   
20:47:36    #16 Phase 25 File dlgbrnst.cpp, Line 1725
    Caching of files completed
   
20:47:36    #17 Phase 28 File dlgbrnst.cpp, Line 1725
    Speed measurement started
   
20:47:36    #18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
    Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
   
20:50:08    #19 Text 0 File WriterStatus.cpp, Line 116
    <I: PLEXTOR DVDR   PX-716A> start writing Lead-Out at LBA 2190816 (216DE0h), length 0 blocks
   
20:50:08    #20 Text 0 File ThreadedTransfer.cpp, Line 228
    all writers idle, stopping conversion
   
20:50:08    #21 Phase 29 File dlgbrnst.cpp, Line 1674
    Speed measurement completed: 22x (30.372 KB/s)
   
20:50:08    #22 Phase 32 File dlgbrnst.cpp, Line 1725
    Simulation started at 8x (11.080 KB/s)
   
20:50:47    #23 Phase 34 File dlgbrnst.cpp, Line 1725
    Simulation failed at 8x (11.080 KB/s)
   

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0001), size=17005 bytes, created 06.05.2002 11:01:08
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

einen Defekt des Brenners schließe ich aus, da ich schon den dvd-brenner benq 1640 an meinem system getestet habe und hier kam es zu den gleichen Fehlern.

Weiss jemand einen Rat?

P.S. ich habe gehört, dass es mit den Aspi v 4.71 Probleme geben kann/soll habe darum auch die v.4.6 getestet mit dem selben ergebnis.

Seltsam ist auch warum Nero ausgibt, das alle DMA-Kanäle aus sind dabei sind sie bei jeder Plate ON!

Ich habe mal versucht eine Zusammenstellung mit NeroExpress zu brennen dabei kam eine fast gleiche Fehlermeldung lediglich mit dem Zusatz, dass der Buffer meines Plextor-Brenners zu groß! sei?! :eek:

Mit div. anderen Brennprogrammen ist ein beschreiben einer DVD auch nicht möglich.

Vielen Dank im Voraus!

@MD_FRE@K · 16. Januar 2006

wieso benutzt du aspi treiber ??
welches mainboard hast du ?

666 · 16. Januar 2006

warum keine aspi treiber?

benutze das asus via kt133

@MD_FRE@K · 16. Januar 2006

kann mich nicht erinnern für nen ide brenner jemals aspi treibe rinstalliert haben zu müssen bei meinen via boards ( 3 stück )

MadCat · 16. Januar 2006

Würde auch sagen, daß die ASPI-Treiber die Probleme auslösen.

666 · 16. Januar 2006

ok werde die aspi treiber mal vom system entfernen und testen.

report folgt später

666 · 16. Januar 2006

So nun habe ich sämtliche ASPI-Treiber von meinem System entfernt - der Fehler bleibt bestehen. Dann habe ich aus dem Nero Core Verzeichnis "Core\Wnaspi32.dll': Ver=2.0.1.74," die aspi Datei entfernt - der Fehler bleibt weiterhin bestehen - die error-log in der nicht viel anderes steht enthalte ich euch aber nicht vor

Code:

Windows XP 5.1
IA32
WinAspi: -

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:             <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 2 - 7.0.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      8192kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <Generic  DVD-ROM         >Version: 1.0  - HA 1 TA 0 - 7.0.1.4
 Adapter driver:      <SCSI>                    HA 1

=== Scsi-Device-Map ===
DiskPeripheral       : WDC WD800JB-00CRA1      17.0     ultra Port 0 ID 0  DMA: Off
DiskPeripheral       : SAMSUNG SP2014N         VC10     ultra Port 0 ID 2  DMA: Off
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 1 ID 0  DMA: Off
CdRomPeripheral      : TOSHIBA DVD-ROM SD-M15021012    viadsk Port 2 ID 0  DMA: Off
CdRomPeripheral      : PLEXTOR DVDR   PX-716A  1.09    viadsk Port 2 ID 1  DMA: Off
DiskPeripheral       : IBM-DTTA-351010         T56O    viadsk Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
Generic DVD-ROM            D:   CDRom0
TOSHIBA DVD-ROM SD-M1502   E:   CDRom1
PLEXTOR DVDR   PX-716A     I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE           : 0
Physical memory     : 1535MB (1572316kB)
Free physical memory: 1093MB (1119240kB)
Memory in use       : 28 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

16.1.2006
ISO Zusammenstellung
18:47:57	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 2 (Max. of 31 chars)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
18:47:57	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
18:47:57	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
18:47:57	#4 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
18:47:57	#5 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
18:47:58	#6 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2285759 (507:56.59, 4464MB)
	
18:47:58	#7 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
18:47:58	#8 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
18:47:58	#9 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
18:47:58	#10 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2285760 (2285760) = #2285760/507:56.60
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285760 blocks [I: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
18:47:58	#11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [I: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4681236480, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2285760 | lead-out |   1 |    0x41 | 0x00
	
18:47:58	#12 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
18:47:58	#13 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
18:47:58	#14 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
18:47:58	#15 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
18:47:58	#16 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 16x (22.160 KB/s)
	
18:49:03	#17 Phase 38 File dlgbrnst.cpp, Line 1725
	Burn process failed at 16x (22.160 KB/s)
	

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 03.08.2004 22:59:42 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Wenn ich mit dem "AVS Disc Creator" eine DVD beschreiben will, so bekomme ich nach dem Cachen der Dateien und "starten des Brennvorgangs" die Fehlermeldung "Error write buffer sectors"

jemand noch eine idee?

666 · 20. Januar 2006

Alles wieder i.O.!

nach dem ich die via hyperion Treiber (v.504) deinstalliert habe können nun auch DVDs beschrieben werden!
-> zudem wird der DMA Modus / bzw. zu verwendete Treiber und Controller richtig ausgegeben.

Hier die log eines erfolgreichen DVD-beschreibens:

Code:

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 13.09.2001 09:51:38 

NT-SPTI used
Nero Version: 7.0.1.4
Internal Version: 7, 0, 1, 4

Recorder:             <PLEXTOR DVDR   PX-716A>  Version: 1.09 - HA 1 TA 1 - 7.0.1.4
 Adapter driver:      <IDE>                     HA 1
 Drive buffer  :      8192kB
 Bus Type      :      default (0) -> ATAPI, detected: ?
CD-ROM:               <TOSHIBA  DVD-ROM SD-M1502>Version: 1012 - HA 1 TA 0 - 7.0.1.4
 Adapter driver:      <IDE>                     HA 1

=== Scsi-Device-Map ===
CdRomPeripheral      : TOSHIBA DVD-ROM SD-M1502         atapi Port 0 ID 0  DMA: On 
CdRomPeripheral      : PLEXTOR DVDR   PX-716A           atapi Port 0 ID 1  DMA: On 
DiskPeripheral       : IBM-DTTA-351010                  atapi Port 1 ID 0  DMA: On 
DiskPeripheral       : WDC WD800JB-00CRA1      17.0     ultra Port 2 ID 0  DMA: Off
DiskPeripheral       : SAMSUNG SP2014N         VC10     ultra Port 2 ID 2  DMA: Off
CdRomPeripheral      : Generic DVD-ROM         1.0    d347prt Port 3 ID 0  DMA: Off

=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1502   D:   CDRom0
PLEXTOR DVDR   PX-716A     E:   CDRom1
Generic DVD-ROM            I:   CDRom2
=======================

AutoRun : 1
Excluded drive IDs: 
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 1
BUFE           : 0
Physical memory     : 1535MB (1572316kB)
Free physical memory: 834MB (854020kB)
Memory in use       : 45 %
Uncached PFiles: 0x0
Use Inquiry    : 1
Global Bus Type: default (0)
Check supported media : Disabled (0) 

19.1.2006
ISO Zusammenstellung
13:21:26	#1 Text 0 File Isodoc.cpp, Line 6411
	Iso document burn settings
	------------------------------------------
	Determine maximum speed : FALSE
	Simulate                : FALSE
	Write                   : TRUE
	Finalize CD             : TRUE
	Multisession            : FALSE
	Burning mode            : DAO
	Mode                    : 1
	ISO Level               : 1 (Max. of 11 = 8 + 3 char)
	Character set           : ISO 9660
	Joliet                  : TRUE
	Allow pathdepth more than 8 directories : TRUE
	Allow more than 255 characters in path  : TRUE
	Write ISO9660 ;1 file extensions        : TRUE
	
13:21:26	#2 Text 0 File ThreadedTransfer.cpp, Line 525
	ReadBuffer-Pipe got 262144KB of Memory
	
13:21:26	#3 Text 0 File Reader.cpp, Line 124
	Reader running
	
13:21:26	#4 Text 0 File Writer.cpp, Line 113
	Writer E: PLEXTOR DVDR   PX-716A running
	
13:21:26	#5 ISO9660GEN -11 File Geniso.cpp, Line 3312
	First writeable address = 0 (0x00000000)
	
13:21:26	#6 Text 0 File Burncd.cpp, Line 3342
	Turn on Disc-At-Once, using DVD media
	
13:21:26	#7 Text 0 File DlgWaitCD.cpp, Line 279
	Last possible write address on media:  2298495 (510:46.45, 4489MB)
	Last address to be written:            2242095 (498:14.45, 4379MB)
	
13:21:26	#8 Text 0 File DlgWaitCD.cpp, Line 291
	Write in overburning mode: NO (enabled: CD)
	
13:21:26	#9 Text 0 File DlgWaitCD.cpp, Line 2578
	Recorder: PLEXTOR DVDR   PX-716A, Media type: DVD-R
	 Disc Manufacturer: MCC 03 - RG20  
	 Disc Application Code: 64, Disc Physical Code: 193
	
13:21:26	#10 Text 0 File DlgWaitCD.cpp, Line 458
	>>> Protocol of DlgWaitCD activities: <<<
	=========================================
	
13:21:26	#11 Text 0 File ThreadedTransferInterface.cpp, Line 847
	Setup items (after recorder preparation)
	 0: TRM_DATA_MODE1 ()
	    2 indices, index0 (150) not provided
	    original disc pos #0 + 2242096 (2242096) = #2242096/498:14.46
	    relocatable, disc pos for caching/writing not required/ required, no patch infos
	    -> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2242096 blocks [E: PLEXTOR DVDR   PX-716A]
	--------------------------------------------------------------
	
13:21:26	#12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
	Prepare recorder [E: PLEXTOR DVDR   PX-716A] for write in CUE-sheet-DAO
	DAO infos:
	==========
	 MCN: ""
	 TOCType: 0x00; Session Closed, disc fixated
	 Tracks 1 to 1:
	   1: TRM_DATA_MODE1, 2048/0x00, FilePos             0             0    4591812608, ISRC ""
	DAO layout:
	===========
	 __Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
	       0 |  lead-in |   0 |    0x41 | 0x00
	       0 |        1 |   0 |    0x41 | 0x00
	       0 |        1 |   1 |    0x41 | 0x00
	 2242096 | lead-out |   1 |    0x41 | 0x00
	
13:21:26	#13 Text 0 File SCSIPassThrough.cpp, Line 36
	SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
	
13:21:26	#14 Phase 24 File dlgbrnst.cpp, Line 1725
	Caching of files started
	
13:21:27	#15 Text 0 File Burncd.cpp, Line 4176
	Cache writing successful.
	
13:21:27	#16 Phase 25 File dlgbrnst.cpp, Line 1725
	Caching of files completed
	
13:21:27	#17 Phase 36 File dlgbrnst.cpp, Line 1725
	Burn process started at 16x (22.160 KB/s)
	
13:21:27	#18 Text 0 File ThreadedTransferInterface.cpp, Line 2685
	Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
	
13:21:27	#19 Text 0 File DVDR.cpp, Line 2580
	Recording mode: Sequential Recording Mode
	
13:21:27	#20 Text 0 File MMC.cpp, Line 21611
	Set BUFE: BURN-Proof -> ON 
	
13:21:27	#21 Text 0 File DVDR.cpp, Line 2735
	Start write address at LBA 0
	DVD high compatibility mode: Yes
	
13:21:27	#22 Text 0 File Cdrdrv.cpp, Line 8411
	---- DVD Structure: Physical Format Information (00h) ----
	Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
	 Book Type: DVD-R   (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
	 Disc Size: 120 mm,      Maximum Rate: <not specified> (F h)
	 Number of Layers: 1,    Track Path: Parallel Track Path (PTP),  Layer Type: recordable
	 Linear Density:         0,267 um/bit,  Track Density:  0,74 um/track
	 Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
	 End Physical Sector Number of Data Area:      26127F h
	 End Sector Number in Layer 0:                 0 h (LBN: FFFD0000 h, 4193920 MB)
	 Data in Burst Cutting Area (BCA) does not exist
	  Start sector number of the current Border-Out: 0 h
	  Start sector number of the next Border-In:     0 h
	 Media Specific [16..63]:
	      00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00    .`...0@P...!....
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	      00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00    ................
	
13:21:33	#23 Text 0 File Cdrdrv.cpp, Line 1197
	13:21:33.973 - E: PLEXTOR DVDR   PX-716A : Queue again later
	
13:28:57	#24 Text 0 File WriterStatus.cpp, Line 116
	<E: PLEXTOR DVDR   PX-716A> start writing Lead-Out at LBA 2242096 (223630h), length 0 blocks
	
13:28:57	#25 Text 0 File ThreadedTransfer.cpp, Line 228
	all writers idle, stopping conversion
	
13:28:57	#26 Text 0 File DVDR.cpp, Line 2978
	EndDAO: Last written address was 2242095
	
13:29:15	#27 Phase 37 File dlgbrnst.cpp, Line 1725
	Burn process completed successfully at 16x (22.160 KB/s)
	

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 13.09.2001 09:51:32 
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12.03.2005 00:28:14 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

Anmelden

DVD beschreiben mit Plextor 716A+Nero nicht möglich

666

@MD_FRE@K

666

@MD_FRE@K

MadCat N7 Moderator

666

666

666

Willkommen bei GameStar!

Weiter mit Werbung

Werbefrei mit GameStar Plus

DVD beschreiben mit Plextor 716A+Nero nicht möglich

MadCat N7 Moderator